Prefabricated houses are among the most preferred housing structures in recent years. While prefabricated houses offer quick and simple solutions to natural disasters such as earthquakes and floods, they are also preferred for different purposes such as temporary housing, social housing, refugee camps when necessary. Prefabricated houses, which have become popular with the innovations and developments in the construction industry in recent years, have many different advantages compared to houses built with traditional methods. Of course, the most important advantage is that it is less costly compared to traditional houses. There are many factors that reduce the cost of prefabricated houses. Controlled production in the factory environment allows for advanced design opportunities, while at the same time reducing the cost. Prefabricated houses can be produced in the desired design in the desired time. Another factor that reduces the cost of prefabricated houses is the installation of the houses.
Prefabricated houses can be built in a much shorter time compared to houses built with traditional methods. It also requires very little labor. Thanks to all these features, prefabricated houses constitute the construction method of the future. The best affordable eco-friendly portable homes and Prefab homes use less energy during construction and are typically built with environmentally friendly. Another advantage of prefabricated houses is that they are environmentally friendly. Prefabricated houses do not leave any impact on the environment when they are produced or installed. It does not require heavy machinery during its installation, as in traditional houses built. In this way, prefabricated houses do not cause environmental pollution. Eco friendly portable homes price is also lower than its traditional counterparts.
Prefabricated houses have been used for commercial purposes in different industries for a long time. Useful housing is needed for the accommodation of workers in construction site camps and similar worker camps. Eco friendly portable homes are used in almost every industry. It is very difficult to construct a building with these characteristics with traditional methods. The main factors that complicate the construction of traditional structures on construction sites are labor, cost and logistics. The emergence of prefabricated houses has emerged as a result of the need for structures that need to be provided practically and quickly, such as construction site camps. The ready transportation of the building, which was built in another environment, not on the site, has greatly shortened the construction period. In this way, heavy construction machines do not need to enter the construction site and the pollution that will occur in the area is prevented. If you want to get information for eco friendly portable homes price in Australia, please contact us.
Karmod currently exports nearly 90 countries globally. Our production team takes care of weather conditions, snow and wind load of the location where the building will done and the the production / assembly will be done accordingly.
Houses, villas, offices,social housing, social facilities,construction sites, cafeteria and dormitories, prefabricated factory and hangars
The quality and thickness of the steel structure, thickness and quality of the materials that used in wall panels, roof insulation, quality of Windows.Additionally extra materials for insulation in walls and in roof can affect the price.
• The reliability of the company is very important. • The workmanship, after sales support, corporateness and the quality of the people whom work with of the company is very important. • The quality of materials and the quality certifications are very important. • Have an interview with the company.Make sure that they are expert • Review the contract details. • Make sure that the company have a profesional team in the manufacture , installation and after sales service In case of having problem after the installation , make sure that the company could solve the problem quicklya and answer your inquiries.
Exterior wall panels and roof can be modificate according to weather and climate conditions with TS 825 norms.
Prefabricated houses are manufactured for all kind of uses and purposes.They are practical and rapid for installation by modules.With a flexible structure feature , they are resistant to earthquakes and subsidence of ground.Prefabricated houses are manufactured according to all climatic conditions.They have superior features to the other structures about heat and sound insulation.It can be builded within a short time without harming the environment and without pollution.Manufactured in accordance with modern and historical texture.They are resistant to fire.Optionally, prefabricated houses can be demounted and be installed in other place.
Transportation of prefabricated buildings are operated by trucks, trailers,ships, trains and cargo planes.
You can easily get warm with stove, air-conditioner, natural gas or electrical heater in winter, and you can cool your room with air-conditioner in summer.
It is posible to build on single storey concrete building.The bottom building must have a solid and flat floor.Also bottom building can not have a chimney.It is not safe to install a chimney for fire risk and waterproofing system.
-For ground concrete, wire mesh with iron rod 30 cm basement -Excavation and landscaping works -Floor and wall covering (screed, ceramic , tile and laminant parquet) -External connections (electrcity, sewage and clean water) -Permits and licences from Provincial or from Municipalities. -Heating and cooling system ( Heating,air conditioning etc.) -Accomodation, food and transportation costs of the assembling crew.
We can construct as 2 story houses with prefabricated technology and 3 story houses with light steel technology.
It is under discretion of the Municipality where the building to be constructed. For obtaining permit, Architectural plan, Electrical plan, Mechanical plan, and ground survey should be met by the customer. If required, we can only provide statistical calculations of the building. Permits and legal allowances need to be taken by the customer itself. If the location where the building to be constructed within a municipal area, then a permit is required.
Prefabricated houses are in the long life building class and can be used safely about 50 years.Excessive wind, snow, rain, humitidy and the way of usage are the factors that can affect the structure’s life.It is needed to make maitenence as the other type of buildings need.
For wet areas, in order to tile the walls , moisture-proof green coloured gypsum board is applied.Ceramic can also applied with plaster and net.Before applying the ceramic to the ground , waterproofing should be done with cement finish.
For roof cladding , natural trapezoidal sheet roof, painted trapezoidal sheet, tile patterned sheet metal can be applied on metal purlins.Also can be applied on OSB material.In addition ,sandwich panels and shingles are also avaible.
Our warranty period is 1 year against manufacturing and assembly faults if it is used acording with our general terms in our contract.Karmod is the leader and the pionner company in the sector for after selling service.Our after sales service is always with you.
The ground should be 30 cm wider for each side of the house.The height of ground should be 25-30cm. A heavy concrete foundation ,as it is used for concrete buildings, is not necesary. During the contract signing phase,we give the concrete plan to the customer. Our customers should prepare the concrete floor acording to that plan before the construction.
Our prefabricated houses are build according to the static structure based on weather and climate conditions of the place that they build. On condition that keeping the static structure of the building you are able to make modification. We recomend to contact with our after-sales departmant for your modification plan.
Production time is for standart building is one week under normal conditions. Depending on weather conditions, our assembling team is capable of build 20-25 m2 for single storey houses and 15-20 m2 for two storey houses a day. After the installation completes , painting process can be completed 1-3 days.With a good planning, in a short time like within a month you can settle into the building.
You can come to us with your own design and drawings and we can together customize a building project within our production constraints, e.g. dimensional constraints due to our standard panelized system. Our representatives will assist you to create a prefabricated building design that best suits your needs.
Karmod prefabricated buildings exteriors walls are 10 cm thick with strafor panel system. They have more heat and sound insulation than conventional concrete building. Glass wool and Rock wool that are used in wall and roof panels are provide high rate of insulation.
As it is required for any type of building ,prefabricated houses are required to maintenance. Prefabricated houses are formed from a combination of different types of materials.All these materials have diferent degrees of expansion coefficiency.The cracks between the panels may occur for these kind of reasons.These crack would be repaired by mastic material and paint.
Prefabricated buildings are resistent to 7.5 magnitude and 80 km/ h wind speed. Considering the weather and climate conditions of the place that the houses will build, we are able to deliver our prefabricated products to any place in the world.
Karmod prefabricated homes are produced in modern facilities with seamless threaded system technology.Bolted joints are stronger and safer than welded system.Faulty workmanship is reduced at minimum.Metal sheet,EPS and cement board are the main materials that we use in our production.We also use %100 stainless products.Wall panels are made of 2 diferent types as Cement board- styrofoam – Cement board and Metal sheet-Styrofoam- metal sheet and have high insulation rate.Roof trusses are manufactured with bolt system and produced in automatic roll form machines acording to the Project.Columns and cross joints of roof trusses are manufactured with static calculation by our ingeneers acording to conditions of the place that will be constructed.For roof cladding , galvanized metal sheets are in use as a standart product. Materials such as OSB, membrane and shingle can be applied upon request.Windows and balcony doors glasses are PVC doubled glazed.For inner doors american panel doors are in use. All the materials that used for electrical and sanitary installations are acording to TSE standarts and they all have certificate and warranty documents.